We produce chemical and technological equipment from titanium alloys, stainless, low-carbon, alloyed, low-alloy steels, as well as aluminum alloys.
We perform welding in carbon dioxide, argon mixture, automatic submerged arc welding, as well as welding of dissimilar metals (MIG/MAG, TIG, SMAW, SAW).
The screw solvent with a dewatering elevator assembly is designed for leaching potassium chloride from silvinite ore as part of the processing line of processing plants.
The screw solvent with a dewatering elevator assembly consists of the following main parts:
Наименование параметров
Растворитель шнековый
Элеватор обезвоживающий
Производительность:
по твердой фазе, т/ч
900
900
по жидкой фазе, м³/ч
1700
-
Давление рабочее
под налив
под налив
Температура рабочая, °С
97±5
97±5
Рабочий орган
Ротор
Цепь ковшовая
Активный объем растворителя (объем растворителя занимаемый ротором), м³
274,6
Объем ковша, л
274,6
Полный – 320,
рабочий – 260
Габаритные размеры площадки для установки корпуса растворителя шнекового, мм (не более):
длина, мм
30000
ширина, мм
12000
высота, мм
15000
Материальное исполнение
высоколегированная коррозионностойкая сталь, стойкая к химической, электрохимической, межкристаллитной коррозии 1.4462 по EN
Режим работы
непрерывный (24 часа в сутки)
The screw mixer is designed for mixing dry, loose and liquid condensed products in order to obtain a mixture of high homogeneity. The screw mixer is characterized by high productivity with small dimensions, easy operation and long service life. Material of the mixer: stainless or carbon steel; depending on the design and requirements of the technological process, the screw mixer can be equipped with heating elements.
Depending on the mixing process, mixers can be manufactured in different versions:
continuous and periodic
number of working bodies — one, two
design of working bodies — screw ones
Fluidized bed furnaces are a type of technological industrial furnaces where cooling/drying/roasting of the product (charge) to be filled is carried out in a pseudo-liquefied, so-called fluidized bed. The operating principle of the furnace is based on the interaction of the supplied material with the heated/cooled gas stream (air, oxygen, flue gases) passing through it, as a result of which high efficiency of heat and mass transfer processes is ensured and increased uniformity of the finished product is achieved compared to other furnaces.
Fluidized bed furnaces consist of the following main parts:
loading shaft
reaction chamber
heating agent supply chamber
hearth
discharge tray
Наименование параметров
Растворитель шнековый
Элеватор обезвоживающий
Производительность:
по твердой фазе, т/ч
900
900
по жидкой фазе, м³/ч
1700
-
Давление рабочее
под налив
под налив
Температура рабочая, °С
97±5
97±5
Рабочий орган
Ротор
Цепь ковшовая
Активный объем растворителя (объем растворителя занимаемый ротором), м³
274,6
Объем ковша, л
274,6
Полный – 320,
рабочий – 260
Габаритные размеры площадки для установки корпуса растворителя шнекового, мм (не более):
длина, мм
30000
ширина, мм
12000
высота, мм
15000
Материальное исполнение
высоколегированная коррозионностойкая сталь, стойкая к химической, электрохимической, межкристаллитной коррозии 1.4462 по EN
Режим работы
непрерывный (24 часа в сутки)
Salt sludge thickener is a cylindrical chemical and technological device designed for brine purification and thickening of salt sludge under the action of mass (gravitational) forces. In order to effectively remove air and liquid phase from the zone of compacted sediment, thickeners are equipped with a central drive of the rowing mechanism, with "agitators" installed on it. For thickeners working on flotation pulps, a foam removal system with foam removers is provided. To intensify the thickening processes, a floaculant can be added during operation.
It is possible to manufacture thickeners with diameters of 10, 12, 14, 16, 18 meters.
Evaporation plant – a chemical and technological device designed to produce a concentrate of non-volatile components or to produce concentrates of higher quality by removing part of the solvent by transferring it to the vapor phase and then removing the resulting (secondary) steam from the boiling zone.
They are divided according to the principle of fluid circulation:
forced entry
natural
Classification of evaporators:
by duration of operation: periodic and continuous operation
by frequency of circulation: single and multiple circulation
by circulation mode: with forced and natural circulation
by design: single-and multi-stage
Evaporation units can be manufactured in various material versions and any dimensions.
MASHKHIMPROM LLC produces both horizontal and vertical vacuum crystallizers.
Vacuum crystallizers are vertical or horizontal sealed vessels with agitators, in which a vacuum is created using steam jet ejectors and vacuum pumps. Under such conditions, the solution boils in the crystallizers, water evaporates and the concentrated solution cools, which leads to the formation of crystals.
Гидросепаратор состоит из:
успокоительный стакан (предназначен для подачи исходной пульпы)
желоб для слива
устройство для выгрузки
Пульподелители относятся к аппаратам для непрерывного распределения жидкости. Пульподелители предназначены для разделения потоков пульпы на равные по объему и составу части и могут быть использован при обогащении полезных ископаемых, в химической и других отраслях промышленности.
Изделие обеспечивает равномерность распределения пульпы по потребителям при значительном упрощении конструкции и повышении его надежности.
Kazakhstan, Astana, Yesil district,
Dostyk str., building 16, n.p. 4 KZ55914012203KZ00H5G
+7 776 992 04 09
© 2023 All rights reserved